This part is vehicle specificThis part is vehicle specific and we don't know your vehicle. Tell us your vehicle!

CURT Class 3 Trailer Hitch #13389

Receiver Tube Size: 2 Class: Class 3 Hitch UPC: 612314133895 PC: 75

Where To Buy

MSRP $284.06

  • Made with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid Bonderite coating
  • Strengthened with a cast, welded, seamless collar
  • Equipped with an open-back receiver for easy cleaning
  • Backed by a limited lifetime warranty
  • Made in USA

Notes:

  • Trailer hitch weight ratings are limited to vehicle manufacturer''s stated capacities
  • Uses pre-existing vehicle hardware for installation
Primary Video
Installation
Instruction Sheet Download pdf
Details
Warranty Limited Lifetime
UPC 612314133895
Shipping Weight 53.000
Product Type Description Class 3 Trailer Hitch
Drilling Required No
Main Body Square
Receiver Tube Size 2
Weight Carrying Capacity(WC) 3,500 LB
Tongue Weight(TW) 350 LB
Weight Distribution(WD) 4,000 LB
Weight Distribution Tongue Weight(WDTW) 400 LB

Additional Information

The CURT class 3 trailer hitch is the most common type of trailer hitch installed on full-size pickup trucks and SUVs. It is also found on full-size cars, crossover SUVs, minivans and mid-size trucks. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet. This CURT class 3 hitch offers a gross trailer weight capacity of 3,500 lbs. and a comparable tongue weight capacity of 350 lbs. It is designed to be a custom-fit trailer hitch for certain years of the Dodge Caravan with Stow-n-Go, Grand Caravan with Stow-n-Go or Chrysler Town and Country van with Stow-n-Go (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com).

The 2" x 2" receiver tube opening of this class 3 hitch is able to accept a hitch-mounted accessory, such as a bike rack or cargo carrier, or a ball mount to tow most standard size trailers, including utility trailers, single-horse livestock trailers, boat trailers and large campers. One special feature about the class 3 that is not found in classes 1 or 2 is its compatibility with a weight distribution hitch. When used in combination with a WD hitch, this class 3''s gross trailer weight capacity increases to 4,000 lbs. and the tongue weight capacity to 400 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component).

CURT class 3 trailer hitches are engineered to be strong and capable, having a quality steel frame and a solid finish. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear. Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty.

Electrical

This part is vehicle specific Electrical Connectors are vehicle specific.
Tell us your vehicle!

Vehicles

Year Make Model Style Install Time Other Hitches
2007 Dodge Caravan With Stow-n-Go 30 minutes
2004 Chrysler Town & Country With Stow-n-Go 30 minutes
2004 Dodge Caravan With Stow-n-Go 30 minutes
2005 Chrysler Town & Country With Stow-n-Go 30 minutes
2005 Dodge Caravan With Stow-n-Go 30 minutes
2006 Dodge Grand Caravan With Stow-n-Go 30 minutes
2007 Dodge Grand Caravan With Stow-n-Go 30 minutes
2007 Chrysler Town & Country With Stow-n-Go 30 minutes
2004 Dodge Grand Caravan With Stow-n-Go 30 minutes
2005 Dodge Grand Caravan With Stow-n-Go 30 minutes
2006 Chrysler Town & Country With Stow-n-Go 30 minutes
2006 Dodge Caravan With Stow-n-Go 30 minutes
Page 1 of 2 12 Total Vehicles

Reviews

Submit Your Review

  • Cancel
Write a Review

Curt 13389 on 07 Chrysler T&C Stow-and-Go

Well built, quality construction, hitch looks great! Installation was much harder than the directions implied, and took me an hour and a half. Getting the hitch past the leaf spring attachment bolt was a monster pain. If the notches in the hitch were 1/4 inch deeper, it would have slide right into position with no trouble at all. Without a floor jack, I don't think I could have installed this by myself. Once in position, all the bolt holes lined up perfectly, and it's very secure. Also, the directions say the attach bolts are 10 and 12mm. On my van, they are 15 and 18mm, check that you have the right tools before starting! Overall, it's a great hitch and I'd buy it again.

Videos

How To

Product Video