This part is vehicle specificThis part is vehicle specific and we don't know your vehicle. Tell us your vehicle!

CURT Class 1 Trailer Hitch #11184

Receiver Tube Size: 1.25 Class: Class 1 Hitch UPC: 612314010950 PC: 133

Where To Buy

MSRP $211.00

  • Made with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid Bonderite coating
  • Strengthened with a cast, welded, seamless collar
  • Equipped with an open-back receiver for easy cleaning
  • Backed by a limited lifetime warranty
  • Made in USA


  • Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
  • Includes installation hardware, pin & clip
Primary Video
Instruction Sheet Download pdf
Mount Type Description Blank
Part Type Class 1 Trailer Hitch
Side Application Type Description Blank
Warranty Limited Lifetime
Main Body Square
Shipping Weight 19.150
Drilling Required No
UPC 612314010950
Weight Carrying Capacity(WC) 2,000 LB
Tongue Weight(TW) 200 LB
Weight Distribution Tongue Weight(WDTW) n/a
Weight Distribution(WD) n/a
Receiver Tube Size 1.25

Additional Information

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).

Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the BMW 1 Series coupe or convertible (to verify your vehicle compatibility, see the CURT application guide at It features a square tube frame and comes with a hitch pin and clip and all necessary installation hardware.

Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty.


This part is vehicle specific Electrical Connectors are vehicle specific.
Tell us your vehicle!


Year Make Model Style Install Time Other Hitches
2008 BMW 128i All
2009 BMW 128i All
2010 BMW 128i All
2009 BMW 135i All
2010 BMW 135i All
2011 BMW 135i All
2011 BMW 1 Series M All
2011 BMW 128i All
2008 BMW 135i All
9 Total Vehicles


Submit Your Review

  • Cancel
Write a Review

2013 BMW 128i

Although the website says this hitch will not fit a 2013 BMW 128i, if the rear bumper cover is removed, the hitch fits just like the instructions. Research youtube for the proper method of removing the cover. Removal takes about 45 minutes. Remember the hidden screw above the wheel well. Perfect!!

Very Impressed

This item fit perfectly on my 2011 135i Convertible. Fitment was perfect. Directions provided were spot on and the measurements for cutting the plastic was very accurate.


How To

How To

Product Video