This part is vehicle specificThis part is vehicle specific and we don't know your vehicle. Tell us your vehicle!

CURT Custom Wiring Harness #55050

Class: Wiring UPC: 612314550500

Where To Buy

MSRP $79.26

  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with a powered 3-wire to 2-wire electrical converter
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
  • Backed by a limited one-year warranty
  • Made in USA


  • Includes powered 3-wire to 2-wire electrical converter with wiring kit (connection to battery required)
Instruction Sheet Download pdf
Shipping Weight 1.645
Part Type Custom Wiring Harness
Battery-Powered Yes
Warranty One Year Limited
T-Connector Location P1,P2
Turn and Brake Circuits 3.0 Amps
Tail Light Circuits 6.0 Amps
Electrical System Type 3W
Output Type 4-Way Flat
Converter Type Circuit Protected and Powered
UPC 612314550500

Additional Information

A CURT custom wiring harness (also called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring.

Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT''s custom wiring harnesses come into play. Custom wiring harnesses plug into your vehicle''s electrical system using original equipment (OEM) connectors. Our custom wiring harnesses use two or more OEM connectors to plug in at the taillight assembly and provide a standard trailer socket to allow a trailer to be plugged into your vehicle''s power system.

This harness provides a 4-way flat connector socket and comes with a circuit-protected converter. It is designed to be a custom wiring harness for certain years of the Dodge Caliber (except SRT), Jeep Patriot or Jeep Compass (including Rallye package) (to verify your vehicle compatibility, see the CURT application guide at CURT custom wiring harnesses are long-lasting and quick to install. They come with dust covers to keep your connector clean when not in use and feature a one-year limited warranty to give you peace of mind.


Year Make Model Style Install Time Other Hitches
2007 Jeep Patriot All
2007 Dodge Caliber SE
2007 Dodge Caliber SXT
2009 Jeep Compass Sport
2007 Jeep Compass Sport
2008 Jeep Compass Sport
2010 Jeep Compass Sport
2007 Dodge Caliber R/T
2007 Jeep Compass Limited
2008 Jeep Compass Limited
2009 Jeep Compass Limited
2010 Jeep Compass Limited
Page 1 of 2 12 Total Vehicles


Submit Your Review

  • Cancel
Write a Review

wiring and hitch for 07 caliber

I must say that this is the best wiring system that I have ever bought for the hookup for a car. I have installed a lot of them. It does take some time to do but it is well wroth the time. What took the time was running the wire to the battery and that is because I run the wire though the in side of the car and had to take the panels off and run it with stock wiring. Having every thing I needed to do the job with it made this easy. The hitch fit but I had to dill 2 holes for it cause the holes that were there were too small for the bolts. That was the car makers fault and it was not that way on all of them they must have changed the punch size at sometime. So if you are thinking of buying this you should you will like it. I will add a plug for a 7 point