Your account has been temporarily locked, so no orders can be placed at this time. Please contact our accounts receivable department at 877-287-8634 or email accountsreceivable@curtgroup.com.
Universal Part
UPC: 612314514984

7-Way RV Blade Trailer Brake Controller Tester #51498

Loading Price....
  • Perfect for installing and troubleshooting tow vehicle / trailer wiring systems
  • Tests vehicle wiring for battery voltage, brake voltage and signal circuits
  • Volt meter indicator measures tow vehicle and electric brake voltage
  • Current meter uses magnets to measure brake controller output without a trailer
  • Includes a 20' cable for easy, single-user, in-cab testing
  • Constructed with durable components for long life and dependability
  • Can be used for two-axle or three-axle trailers

Guides & Install Sheets

Product Videos

PRODUCT SPECIFICATIONS

  • Hub WarehouseD01
  • MaterialBlank
  • Parcel AllowedYes
  • Part Type*
  • ShippingFreight Only
  • Shipping Weight12.000
  • WarrantyOne-Year Limited Warranty

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

For any type of trailer, part of towing responsibly is making sure your trailer lights are working properly. With heavy-duty trailers, such as a large boat trailer or 5th wheel camper, that responsibility is even greater. Giving safety its proper priority is easy with the CURT 7-way RV blade trailer brake controller tester. This sophisticated towing electrical tester plugs into any 7-way RV blade socket and allows you to check your vehicle wiring for battery voltage, brake voltage and signal circuits.

The CURT 7-way RV blade brake controller tester accurately measures the brake and battery voltage output at your 7-way connector. It features a volt meter and a current meter for testing brake power and allows you to test the power output of your trailer brake controller unit. The 7-way brake controller tester can be used for trailers with two or more axles, and because it uses a special magnet system, brake controller output can be measured even without a trailer attached. It includes easy-to-follow testing instructions and a 20' cable for single-user, in-cab testing to make it even easier to get to the bottom of any electrical problem.

Operating the CURT 7-way RV blade electrical tester is simple and does not require an additional power source. Simply plug the 7-way RV blade into your vehicle's electrical socket, select your settings with the axle and voltage switches, and you are ready to begin. The tester is able to check your left and right turn signals, brake lights, tail lights and reverse lights if applicable. It also provides the voltage and current of your vehicle's brake controller output. The CURT RV blade tester also offers a number of potential causes of electrical failure, including fuse issues, inadequate wiring, damaged wires or a defective brake controller.

The CURT 7-way brake controller tester is compatible with all CURT trailer brake controllers, and gives you the peace of mind to Bring It on any towing adventure.

Write Your Own Review
You're reviewing:7-Way RV Blade Trailer Brake Controller Tester
Your Rating

1 Item

Show per page
  1. 80%

    BY:

    80%
    Great tester with minor flaw

    Tester works great but the cable comes out the right side, needs to come out the left side of the tester. When sitting in the driver's seat to activate controls, the cable is in the way and has to pass across the driver. Otherwise a great product.

1 Item

Show per page