CURT Brake Control Harness with Pigtails #51440

UPC: 612314514403

No Reviews
Write a Review
Where To Buy

MSRP $14.05

  • Triple-axis, motion-sensing accelerometer for highly responsive, smooth stops
  • Third axis provides dynamic power adjustments when going up or down a hill
  • Nine levels of sensitivity adjustment for varying loads or driving conditions
  • User-selectable power output and trailer brake light activation
  • Automatic leveling and calibration eliminate setup requirements
  • Operates 2-8 trailer brakes at a time (1-4 axles)
  • Digital display shows power adjustments in 0.1 increments
  • Built-in dual-polarity and short-circuit protection
  • Tow vehicle 'low voltage' and trailer disconnect indicators
  • Compatible with low voltage or pulse width modulation (PWM) systems
  • Compact size: 3 1/4" wide, 4" deep, 7/8" tall
  • Mounts at various angles, above or below the dash, to increase usability
  • Auto sleep mode prevents battery drain after five minutes of idle time
  • Equipped with a quick plug for fast, easy installation
  • Patent pending
  • Backed by a limited lifetime warranty
Fit Your Vehicle
Application Guide Download pdf
Installation
Instruction Sheet Download pdf
Details
Shipping Weight 0.185
Product Weight 0.000
Warranty One Year Limited
UPC 612314514403
Weight 0.19
Product Brake Control Adapter Harness

Additional Information

It takes a lot of power to stop a moving trailer, especially when that trailer is hauling a heavy load. On RVs, flatbeds, livestock trailers and many other oversize haulers, manufacturers typically install trailer brakes to assist the tow vehicle in bringing such a massive amount of weight to a halt. But it takes more than a good set of brakes to make quick, efficient stops. It takes precision and the right amount of control.

The crown jewel of CURT's brake control lineup is the TriFlex™. This proportion-based brake control features a compact size, a digital display and the ability to manage up to eight brakes at a time. The feature that sets the TriFlex™ apart from all others is its triple-axis motion-sensing accelerometer. This integrated circuit component allows the TriFlex™ to detect every motion of your vehicle and trailer with exact precision and to then apply the perfect amount of braking power for every situation. The TriFlex™ also automatically adjusts brake output when going up or down a hill and is compatible with anti-lock brakes and cruise control. It comes with a mounting bracket and hardware and can be mounted at various angles on your vehicle's dash. Best of all, like other CURT brake controls, the TriFlex™ is protected by a limited lifetime warranty.

All CURT brake controls are designed to work with quick plugs so that they can readily plug into your vehicle's original equipment socket. They also include a mounting bracket and hardware for easy installation. A brake controller should be mounted somewhere on the dash of your vehicle, and we recommend putting it below the steering wheel, either on the right or left side of the steering column. This way the control will not block your view when driving, but it will remain accessible and visible when adjustment is needed.

Reviews

Submit Your Review

  • Cancel
Write a Review

No Reviews. Be the first person to review this product.