This part is vehicle specificThis part is vehicle specific and we don't know your vehicle. Tell us your vehicle!

CURT Class 3 Trailer Hitch #13328

Receiver Tube Size: 2 Class: Class 3 Hitch UPC: 612314133284 PC: 57

Where To Buy

MSRP $228.42

  • Made with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid Bonderite coating
  • Strengthened with a cast, welded, seamless collar
  • Equipped with an open-back receiver for easy cleaning
  • Backed by a limited lifetime warranty
  • Made in USA


  • Fits with a full-size spare tire under the vehicle
  • Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
  • Includes installation hardware
Primary Video
Instruction Sheet Download pdf
Installation Video
Shipping Weight 46.000
Drilling Required No
Mount Type Description Blank
Part Type Class 3 Trailer Hitch
Side Application Type Description Blank
Warranty Limited Lifetime
UPC 612314133284
Main Body Square
Weight Distribution(WD) 5,000 LB
Weight Distribution Tongue Weight(WDTW) 500 LB
Weight Carrying Capacity(WC) 3,500 LB
Tongue Weight(TW) 350 LB
Receiver Tube Size 2

Additional Information

The CURT class 3 trailer hitch is the most common type of trailer hitch installed on full-size pickup trucks and SUVs. It is also found on full-size cars, crossover SUVs, minivans and mid-size trucks. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet. This CURT class 3 hitch offers a gross trailer weight capacity of 3,500 lbs. and a comparable tongue weight capacity of 350 lbs. It is designed to be a custom-fit trailer hitch for certain years of the Honda Pilot or Acura MDX SUV (to verify your vehicle compatibility, see the CURT application guide at It features a square tube frame and comes with all necessary hardware for a complete installation.

The 2" x 2" receiver tube opening of this class 3 hitch is able to accept a hitch-mounted accessory, such as a bike rack or cargo carrier, or a ball mount to tow most standard size trailers, including utility trailers, single-horse livestock trailers, boat trailers and large campers. One special feature about the class 3 that is not found in classes 1 or 2 is its compatibility with a weight distribution hitch. When used in combination with a WD hitch, this class 3's gross trailer weight capacity increases to 5,000 lbs. and the tongue weight capacity to 500 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component).

CURT class 3 trailer hitches are engineered to be strong and capable, having a quality steel frame and a solid finish. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear. Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty.


This part is vehicle specific Electrical Connectors are vehicle specific.
Tell us your vehicle!


Year Make Model Style Install Time Other Hitches
2008 Honda Pilot All 30 minutes
2004 Honda Pilot All 30 minutes
2005 Honda Pilot All 30 minutes
2007 Honda Pilot All 30 minutes
2001 Acura MDX All 30 minutes
2005 Acura MDX All 30 minutes
2006 Honda Pilot All 30 minutes
2003 Honda Pilot All 30 minutes
2003 Acura MDX All 30 minutes
2006 Acura MDX All 30 minutes
2002 Acura MDX All 30 minutes
2004 Acura MDX All 30 minutes
Page 1 of 2 12 Total Vehicles


Submit Your Review

  • Cancel
Write a Review

Curt 13328 - great product!

This product is of high quality and fits my '05 Honda Pilot perfectly. Installation was extremely easy and I am a novice to these sorts of things. I found that 12 and 10mm (1.25) taps were required to rethread the frame nuts, as 7-8 years of driving in the elements made it impossible to thread the bolts. Tapping took more time than the receiver install. An added plus - I didn't have to lower the exhaust. Nice job Curt Mfg!


Installation Video

How To

Product Video