The CURT class 3 trailer hitch is the most common type of trailer hitch installed on full-size pickup trucks and SUVs. It is also found on full-size cars, crossover SUVs, minivans and mid-size trucks. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet. This CURT class 3 hitch offers a gross trailer weight capacity of 5,000 lbs. and a comparable tongue weight capacity of 750 lbs. It is designed to be a custom-fit trailer hitch for certain years of the Jeep Cherokee (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with all necessary hardware for a complete installation.
The 2" x 2" receiver tube opening of this class 3 hitch is able to accept a hitch-mounted accessory, such as a bike rack or cargo carrier, or a ball mount to tow most standard size trailers, including utility trailers, single-horse livestock trailers, boat trailers and large campers. One special feature about the class 3 that is not found in classes 1 or 2 is its compatibility with a weight distribution hitch. When used in combination with a WD hitch, this class 3''s gross trailer weight capacity increases to 6,000 lbs. and the tongue weight capacity to 750 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component).
CURT class 3 trailer hitches are engineered to be strong and capable, having a quality steel frame and a solid finish. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear. Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty.
Electrical Connectors are vehicle specific.
Tell us your vehicle!
Submit Your Review
Installing hitch 13172 2015 Jeep Cherokee Latatude
The fit was ok but we had to cut notches in the exhaust ports because they hit on the hitch when trying to put them back in place and then we had to place 3 washers under the exhaust hanger to drop it down a bit so when I hit bumps the muffler wouldn't hit the hitch. Jeep changed a few things at the rear from 2014 to 2015 but it seems to work.