This part is vehicle specificThis part is vehicle specific and we don't know your vehicle. Tell us your vehicle!

CURT Class 1 Trailer Hitch #11750

Receiver Tube Size: 1.25 Class: Class 1 Hitch UPC: 612314012893 PC: 177

Where To Buy

MSRP $326.70

  • Made with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid Bonderite coating
  • Strengthened with a cast, welded, seamless collar
  • Equipped with an open-back receiver for easy cleaning
  • Backed by a limited lifetime warranty
  • Made in USA


  • Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
  • Includes installation hardware, pin & clip
Primary Video
Instruction Sheet Download pdf
Part Type Class 1 Trailer Hitch
Main Body Flat
Warranty Limited Lifetime
Shipping Weight 20.250
Drilling Required Yes
Weight Distribution Tongue Weight(WDTW) n/a
Receiver Tube Size 1.25
Weight Distribution(WD) n/a
Weight Carrying Capacity(WC) 2,000 LB
Tongue Weight(TW) 200 LB
UPC 612314012893

Additional Information

CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount receiver lineup. They are engineered for reliability, welded together with quality American steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).

Class 1 hitches feature a 1 1/4" x 1 1/4" receiver tube opening and are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Jaguar XK8 or XKR coupe or convertible (to verify your vehicle compatibility, see the CURT application guide at It comes with a hitch pin and clip and all necessary installation hardware.

Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty.


This part is vehicle specific Electrical Connectors are vehicle specific.
Tell us your vehicle!


Year Make Model Style Install Time Other Hitches
1997 Jaguar XK8 All
1998 Jaguar XK8 All
1999 Jaguar XK8 All
2000 Jaguar XK8 All
2000 Jaguar XKR All
5 Total Vehicles


Submit Your Review

  • Cancel
Write a Review

Jaguar XK8 Conv. 2001

I just installed this hitch on a 2001 XK8 Convertible. The reason it shows as not compatible with the post-2000 cars is that the bumper skirt on the 2001 -2006 models extends about 2 inches lower. It is necessary to notch the bumper skirt out about 2x2 inches to make room for the receiver. All other attachment points work just like on the 1997-2000 models. The install was straightforward and took me about 90 minutes. The hitch is very solid. I'm going to mainly use it to attach a 2-bicyle hitch-mount transport rack


How To

How To

Product Video