Class 1 Fixed-Tongue Trailer Hitch with 3/4" Trailer Ball Hole #11531
- Class 1 Fixed-Tongue Trailer Hitch with 3/4" Trailer Ball Hole
- Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
- Engineered with a vehicle-specific design for a custom fit
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Fixed drawbar readily accepts a 3/4" trailer ball shank
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Limited lifetime warranty (one-year finish, one-year parts)
- Made in USA (may include imported hardware)
Notes:
- Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
- Includes installation hardware
Guides & Install Sheets
PRODUCT SPECIFICATIONS
- Ball Hole3/4 IN
- Drilling RequiredNo
- FinishGLOSS BLACK POWDER COAT
Hub Warehouse D01- Installation DifficultyEasy
- Main Body ShapeSquare
- MaterialCarbon Steel
- Part TypeClass 1 Trailer Hitch
- Product Weight17.000
- Receiver Tube SizeNo Receiver Tube
- Shipping Weight20.450
- Tongue Weight (TW)200 LB
- WarrantyLimited Lifetime Warranty (One-Year Finish, One-Year Parts)
- Weight Carrying Capacity (WC)2,000 LB
- Weight Distribution (WD)n/a
- Weight Distribution Tongue Weight (WDTW)n/a
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2,000 lbs. of gross trailer weight and 200 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).
This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Geo Storm coupe or hatchback (except GSI) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It features a square tube frame and comes with all necessary installation hardware.
Each CURT class 1 hitch is co-cured with a liquid A-coat and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT custom-fit receiver hitches, this class 1 hitch is made right here in the USA (may include imported hardware) and is backed by a one-year finish warranty and a limited lifetime warranty.