Class 1 Fixed-Tongue Trailer Hitch with 3/4" Trailer Ball Hole #11517
- Rated to 1,500 lbs. gross trailer weight and 150 lbs. tongue weight
- Engineered with a vehicle-specific design for a custom fit
- Concealed main body for OE look and seamless integration with the vehicle
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Fixed drawbar readily accepts a 3/4" trailer ball shank
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid Bonderite coating
- Limited lifetime warranty (one-year finish, one-year parts)
- Made in USA (may include imported hardware)
Notes:
- Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities
- Includes installation hardware
Guides & Install Sheets
PRODUCT SPECIFICATIONS
- Ball Hole3/4 IN
- Drilling RequiredYes
- FinishGLOSS BLACK POWDER COAT
Hub Warehouse D01- Installation DifficultyEasy
- Main BodyFlat
- MaterialCarbon Steel
- Part TypeClass 1 Trailer Hitch
- Product Weight11.000
- Receiver Tube SizeNo Receiver Tube
- Shipping Weight13.500
- Tongue Weight(TW)150 LB
- WarrantyLimited Lifetime Warranty (One-Year Finish, One-Year Parts)
- Weight Carrying Capacity(WC)1,500 LB
- Weight Distribution Tongue Weight(WDTW)n/a
- Weight Distribution(WD)n/a
CURT class 1 trailer hitches are the lightest-duty hitches of our rear mount lineup. They are engineered for reliability, welded together with quality steel and blasted clean for a smooth finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 1,500 lbs. of gross trailer weight and 150 lbs. of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).
This class 1 hitch is a fixed-tongue hitch, having a fixed draw bar to accept a trailer ball rather than a receiver tube to accept a ball mount. Class 1 hitches are typically mounted on compact cars, full-size cars and some smaller crossover SUVs, minivans and compact SUVs. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the BMW 6 Series coupe (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). It comes with all necessary installation hardware.
Each CURT class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat that provide a lasting defense against rust, wear and harmful UV rays. Like all CURT custom-fit receiver hitches, this class 1 hitch is made right here in the USA (may include imported hardware) and is backed by a one-year finish warranty and a limited lifetime warranty.
YEAR | MAKE | MODEL | STYLE |
---|---|---|---|
1977 | BMW | 630CSi | ALL |
1978 | BMW | 630CSi | ALL |
1978 | BMW | 633CSi | ALL |
1979 | BMW | 633CSi | ALL |
1980 | BMW | 633CSi | ALL |
1981 | BMW | 633CSi | ALL |
1982 | BMW | 633CSi | ALL |
1983 | BMW | 633CSi | ALL |
1984 | BMW | 633CSi | ALL |
1985 | BMW | 635CSi | ALL |
1986 | BMW | 635CSi | ALL |
1987 | BMW | 635CSi | ALL |
1988 | BMW | 635CSi | ALL |
1989 | BMW | 635CSi | ALL |